The Van Camera: For Ford Vans
Work Vans Family Vans Airport Shuttles Community Vans The Van Camera: For Ford Vans
Home
Purchase
Installation
Specifications
Contact Us

 

 

Installation Instructions
Remove 2 screws securing the brake-light
Pull brake-light away from opening.
Drill a 3/8" hole just below the opening, making sure to pierce the edge.

...to allow insertion of the camera cable

Remove camera from bracket and hook bracket onto drip rail

Drill a small pilot hole for tamper-resistant screw


Using included bit, insert tamper-resistant screw. Do not overtighten.

Place a piece of self-stick seal to either side of camera cable

Run camera cable into vehicle and mount control unit  inside.

Make electrical connections. Reverse wire is +12V when vehicle is in reverse. Usually Black/Pink in the driver's kick-panel.
 
 

Affix cover with included cover screw and replace brake light

1

Home :: Purchase :: Installatio Instructions :: Specifications :: Contact Us

Copyright(c) 2006 thevancamera.com                                                                                                                     Site Credits: Media Linkers